A modeler wants to give a discount on the price of cars, but only if the following conditions are satisfied: The modeler creates a rule for this and it is set to trigger on success. How will this rule condition be defined in the Visual Modeler?
Exam C8010-240 - admin post to:2017-07-28 read more

Which of the following are tasks a modeler does NOT perform during product modeling?
Exam C8010-240 - admin post to:2017-07-28 read more

When naming properties, a modeler avoids using names that start with an "_" (underscore). The modeler is correct to do this, because names that start with an "_" (underscore) are which type of properties?
Exam C8010-240 - admin post to:2017-07-28 read more

In the Model hierarchy shown in the following image, Option Item Group 2.1.4 is attached to Model 2.1.1. What will change in Model 2.1.1 if the Option Item Group 2.1.4 is deleted?
Exam C8010-240 - admin post to:2017-07-28 read more

Review to the Model structured as follows: The business requirement calls for the Video Conferencing and Video Streaming Add-On Features to be hidden for Internet Speed lower than 6 Mbps. A junior modeler wrote the rule as follows: A senior modeler advised that to make the Model more maintainable, the assignment actions should be changed to: Which of the following analysis is TRUE?
Exam C8010-240 - admin post to:2017-07-28 read more

A customer wants to buy a telescope and the manufacture wants to limit the selection to one of three magnification sizes:100, 200 and 300. Within the User Entered Values (UEV) control, which property should be used to achieve this behavior?
Exam C8010-240 - admin post to:2017-07-28 read more

Which is the CORRECT statement for testing a Model?
Exam C8010-240 - admin post to:2017-07-28 read more

What is the recommended way to move the Model from one modeling environment to another?
Exam C8010-240 - admin post to:2017-07-28 read more

The UI Control for Option Class 1 is user entered values (UEV). The Option Class Display is chosen as Popup-Qty. The two Option Items 1a and 1b under Option Class 1 are chosen as Numeric. What happens when this is compiled and tested?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler needs to write a rule that evaluates a condition based on a property attached to the parent item in relation to where the rule is attached. When this rule is evaluated, neither the item where the rule is attached, nor the parent, can be assumed to be selected. How can this be accomplished?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is testing a pre-configured product in the ordering processes and notices that when the product is added to the cart without further configuration, an item that was intended to be in the configuration does not show up in the shopping cart. What is NOT a possible cause of this problem?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is setting up properties in a sub-model and only wishes to receive a subset of the parent's properties. What type of properties should be identified in the sub-model?
Exam C8010-240 - admin post to:2017-07-28 read more

When importing a Model which already exists, which option is available to the modeler?
Exam C8010-240 - admin post to:2017-07-28 read more

In a Model that is used to configure and order "Tractors", the configuration of the "Attachment" is rather simple. A "Tractor" can only be ordered with one optional "Attachment". A junior modeler planned to use sub-model punch-in and punchout, and while seeking the advice of a senior modeler, was told that it was an inappropriate solution. The modeler is advised to avoid the sub-model punch-in and punch-out. What is an INVALID justification to do so?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler would like to write a formula to insert a description so that it could pull in the manufacturer's name. The description needs to change for each Option Item in order to reflect a new manufacture name. Assume the property name assigned to the manufacturer's name is: "mfd name" How can this formula be written?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: Which display property has been applied to display "(2.0 weeks lead time)" and "(1 week lead time)" next to the Option Items?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model references an Option Class Group and has been cached. The modeler notices an issue and modifies the Option Class Group. What is the minimum that has to be done to have the modified Option Class Group be reflected in the Model?
Exam C8010-240 - admin post to:2017-07-28 read more

A company wishes to isolate the Model development only to the development environment. As such, Visual Modeler is not installed in the QA or Production environments. How can the Model be promoted from development to QA?
Exam C8010-240 - admin post to:2017-07-28 read more

A car manufacturer wants to display a list of available cars based on what the customer chooses for the: What should be the rule fragment/condition written for this?
Exam C8010-240 - admin post to:2017-07-28 read more

A furniture and office supplies company sells all items (e.g. chairs, telephone extensions, desktops, cabinets, etc.) required for setting up an office. Models have been created for each of these items, allowing customers to configure them as per their requirement. A marketing professional comes up with the concept of a "complete seat", which will consist of a chair, a telephone, a desktop and a cabinet. How should a "complete seat" be modeled to reuse as many components as possible?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is working on a project for a telecom company. The requirement is that when configuring the "Internet" account, the user must be able to add an unlimited number of email addresses and the Model must capture all the email addresses. What can a modeler do to meet this requirement?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler creates a Model for a desktop with multiple layers of Option Classes. To keep the price of the desktop low, the modeler decided on a maximum price for each group of components and marked it at the appropriate Option Class level with the property "maxPrice". The rules for validating that the price does not go beyond the max set for that component or subcomponent is defined at Model and attached at the Option Items. What function can be used in the rule to determine the "maxPrice" for each component?
Exam C8010-240 - admin post to:2017-07-28 read more

Due to recent enhancement in the product features, the modeler needs to give an inventory of all the rules and properties existing within the Model. What approach should the modeler take?
Exam C8010-240 - admin post to:2017-07-28 read more

To represent an entertainment collection, a modeler creates a Model Group with Models for books, songs, movies. etc. Option Classes in each Model represent different genres and the Option Items are the individual works of art (specific songs, movies, books, etc.). Given that the term "'artists" is applicable to songs and movies but not to books, where should a property denoting "artists" be defined and attached?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler discovers that there is Option Item Group in the root Model Group that exists for different logos which can be offered for printing on variety of articles. The modeler starts using it in the t-shirt Model and then notices that a new property for background color is required for all the logos. The modeler can create and use the property by creating the property on the:
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is troubleshooting and debugging a Model. In the shopping cart, the modeler could only see items with a SKU attached to it. Where can the modeler see the rest of the selections, including those without a SKU?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the rule trace shown in the following image: How many televisions (TVs) are in the home?
Exam C8010-240 - admin post to:2017-07-28 read more

There are four companies listed as good manufacturers of hard disc drives, and each of these companies manufacture two types of hard drives (i.e. hard drive type IDE or SATA). For a modeler, which modeling structure is reusable and easy to maintain?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler has to create a rule with many fragments. In which order should the fragments be set up for better performance?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler wishes to duplicate the Model from Model Group A to Model Group B, to take advantage of some of the reusable components inside Model Group B. How can this be MOST efficiently achieved?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model is developed per the following image: To ensure consistency and control of priorities, which of the following statements is TRUE?
Exam C8010-240 - admin post to:2017-07-28 read more

The project requirements call for the display of the user's city of residence in the Product/Option Item description. The user's city of residence can be obtained through a web service if the user's email address is passed to the web service. This requirement can be achieved with:
Exam C8010-240 - admin post to:2017-07-28 read more

A Model has property values that change frequently, and these changes are communicated by an external vendor. The modeler needs to make these changes as required. What is the MOST efficient way of updating the Model with these frequent changes?
Exam C8010-240 - admin post to:2017-07-28 read more

A product in the catalogue can be made configurable by associating:
Exam C8010-240 - admin post to:2017-07-28 read more

A storefront wants to: 1.hide their out-of-stock product A during the configuration process. 2.promote their fast selling product B by including some information that will always be shown about the product. Which UI properties should be chosen for products A and B?
Exam C8010-240 - admin post to:2017-07-28 read more

A furniture company has a Model for a house with an option to select different types of furniture commonly found in a house (e.g. tables, chairs etc). Each of those furniture types are modeled as Option Classes and the available options are defined as Option Items. The prices are defined as a property on Option Items. Multiple selections can be made in each of the furniture types and quantities can be entered for them. Which function(s) will be needed in a rule attached at the Option Class level to determine the average price of each of the furniture type selected?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler creates a UI Control with an attached SKU that should NOT be displayed in the customer's cart. What can be done to accomplish this?
Exam C8010-240 - admin post to:2017-07-28 read more

If the URL begins with "/", what should the URL be interpreted as for specifying the Image display property?
Exam C8010-240 - admin post to:2017-07-28 read more

A company wants to give its customers a 10% volume discount for its Professional Services if the order totals 100 or more hours. The $250 hourly (undiscounted) base rate for Professional Services is retained in an Option Item under an Option Class called base rates in the model and is never displayed in the UI. Rules will be used to set the UI: PRICE for the Professional Services Option Item displayed in the UI based on the quantity of hours ordered and the UI: PRICE of the hidden base rate Option Item. Review the following images which show what is presented to the user in the UI with and without a discount. When creating these assignment rules, which function needs to be used to retrieve the hourly base rate for Professional Services?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: This is an example of which type of UI Control?
Exam C8010-240 - admin post to:2017-07-28 read more

To meet the same business requirements, two modelers came up with two different Model structures, Model A and Model B (as shown in the following images). How do the two Models compare in regards to performance?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model, ABC_Desktop_7500, is created with Option Classes Microprocessor, Memory, Disc Drive, and Monitor. The modeler is trying to reuse these components in another Model, ABC_Desktop_7600, by attaching Option Classes of ABC_Desktop_7500. The modeler is unable to attach the Option Classes to ABC_Desktop_7600. What is the reason behind this?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler needs to create a property to represent the quantity of televisions in a home where the value needs to be used in a calculation. What type of property should be created?
Exam C8010-240 - admin post to:2017-07-28 read more

During the design of a company's UI, the modeler decides to organize the page and all of its controls into 3 tabs (as shown in the following image). Which of the following is NOT a required step for organizing the controls?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model Group called "Grand Parent" was created with the following structure in it: A modeler wishes to define a property that will be used in Option Class Group A and B. The modeler wants to define the property in the narrowest scope possible to avoid having too many properties defined in one location. The rule that will use this property will be defined in the "Grand Parent" Model Group. What is the right place to define this property?
Exam C8010-240 - admin post to:2017-07-28 read more

When a customer selects an Option Item, the server refreshes/re-displays the page and any changes to the available Option Classes. Which UI property controls this action?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: The modeler needs to divide all the Option Classes into Tab1, Tab2, and Tab3. These tabs should be configured in a sequence, where Tab1 must be configured before Tab2, and Tab2 before Tab3. Which UI Layout should the modeler select?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the Property Pool from the debug console: Which two of the following are INCORRECT?
Exam C8010-240 - admin post to:2017-07-28 read more

A notebook distributor needs to create three configurable products of notebooks (MXLP10001, MXLP10002, MXLP10003). An existing generic services and warranty Option Class Group should be used for all the notebook models. The distributor requires the customer to have the configuration specification of 2GB RAM, 160 GB hard drive, 20" monitor, computer processor, speakers, 3-year services and warranty from MXLP10003 Model. How many additional Option Classes must the modeler create for MXLP10003?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is designing a UI and wants to embed graphic images at the Option Item level. Which of the following UI Controls should NOT be used?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following snapshots of the Option Class Display before and after configuration. What technique is used in the Processors and Memory Option Class to display all the configured instances of Processors and Memory?
Exam C8010-240 - admin post to:2017-07-28 read more

A major bike manufacturer sells customizable bikes online, and includes assembly and shipping. For a bike to be completed, the user must select a frame, tires and gear systems. There are several choices available for the user in each category, but there are some compatibility issues between certain types of frames and the third-party gear systems that the manufacturer uses. For example, there are three sizes the bike frames: 19" 20" and 22". There are three models of gear systems that the manufacturer offers: 6-speed, 18- speed and 24-speed. While 6speed and 18-speed fits all the frame sizes, 24-speed is a premium exclusive model and fits only the 22". The requirement calls for compatibility to be pointed out to the user. What is the correct way to model this product?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following scenario: ?A rule named "Rule_R" is defined on a Model named "Model_M1". ? Model_M1 has an Option Class named "Option_Class_C1", and Rule_R is associated to it. ? Model_M1 is then attached to another Option Class named "Option_Class_C2" of a different Model named "Model_M2". ? Model_M2 already has Rule_R defined. Which rule will be fired on Option_Class_C1?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following Model: The callouts (i.e. "R1", "R2", "R3, R4" and "R5") denote the rules assigned at the different levels. For the rules assigned to the same node, assume that the rules are listed in the increasing order of priority value. What is the sequence in which the rules will be evaluated?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is working on a rule to determine if the customer's location is one of the 10 possible locations where a discounted offer can be given. What type of property SHOULD be used for storing all 10 of the locations in one property?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is about to create an Option Class for logos for a Model of t-shirts. The modeler discovers that there is a Model for logos and that it has been used as a sub-model in a Model for bags. Instead of attaching the Model for logos as a submodel to the Option Class, the modeler wants to copy the reference for the submodel from the Model for bags. What are the possible advantages of doing this?
Exam C8010-240 - admin post to:2017-07-28 read more

A company would like the customers to make processor selection to display compatible sub-models with Configure, Copy, Remove and Add button. Which two of the following are the steps required to achieve this?
Exam C8010-240 - admin post to:2017-07-28 read more

While troubleshooting and debugging a Model, the modeler is unable to determine which properties are output properties. What can be used to provide a BETTER view?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler attempts to copy a rule from one Model to another Model. However, the second Model already has a rule with the same name. How will Visual Modeler behave?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler needs to store the different configuration values of different models of digital cameras. The digital cameras can be compared by using the values by listing them side by side. What can be done so that the modeler can maintain all these product attributes in one single screen?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: What should the modeler do to display the details of the Model shown in the image?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model, ABC_Desktop_7500, is created with the components Microprocessor, Memory, Disc Drive, and Monitor. What modeling construct should be applied to reuse these components in another Model?
Exam C8010-240 - admin post to:2017-07-28 read more

When would a modeler use the UI:IGNORE IN QUOTE field/property?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is asked to develop a Model that looks similar to the following image: The Model should behave such that the user enters a value in QtyA and QtyB. When QtyA is greater than QtyB, the output should be 1. Otherwise 0 should be displayed. The modeler inputs the values as defined in the following image: What is the outcome when the modeler clicks "Update"?
Exam C8010-240 - admin post to:2017-07-28 read more

What can a modeler create inside a Model Group?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler needs to write a rule that performs an action when three products have been selected. The three product SKUs will be provided in a comma separated string value. The property will be in the Property Pool attached to the same item where the rule will be attached. Which Function Handler can be used to complete the rule with the existing property?
Exam C8010-240 - admin post to:2017-07-28 read more

The property "TotalWt" is defined at a Model Group level with a default value of
3. In one of the Models in the Model Group, a property with the same name is defined with a default value of 5. If a modeler attempts to attach "TotalWt" property to an Option Item in the Model, what can be found in the property List Box?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is working on reorganizing a Model into reusable components to improve maintainability. Review the original Model structure as follows: Assume all similarly named (disregard numbering) Option Classes behave exactly the same way. To achieve the maximum level of reusability, what are all the Option Classes that can be made into Option Class Groups and can immediately benefit from the reuse?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is exporting the ModelGroup1 Model Group. ModelGroup1 contains two Models: ModelA and ModelB. The following export options have been chosen: "Model Group" and "Include Attached Models". What output can be expected?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: How many Option Classes and Option Items are required for a modeler to efficiently display the scenario above?
Exam C8010-240 - admin post to:2017-07-28 read more

A company has created Model A with: ?10 Option Classes ?10 Option Items in each Option Class ?50 Properties ?30 Rules The company needs to create Model B and Model C which have properties and rule definitions that are 60% similar to that of the Model A. What approach should the modeler apply to most efficiently reuse the properties and rule definitions?
Exam C8010-240 - admin post to:2017-07-28 read more

Which action happens when a user compiles a Model?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler has designed a Model for configuring a conference room table with an optional center table leg. If a center table leg is selected, a User Entered Value (UEV) will be displayed to allow the user to enter the number of brackets needed to attach the leg to the bottom of the table. The input should be assigned to a property called "NoCenterLegBrackets" (i.e. number of center leg brackets). ?To ensure stability, a minimum of 3 brackets are required to be attached to the center table leg. ?It is not possible to attach more than 6 brackets to the center table leg. ?If the user enters a valid value for number of brackets, it should be retained.
Otherwise it should be set to 3. The rule fires on success. How should this rule be modeled if it has to be attached to the number of brackets UEV Option Item?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is working on improving the performance of a rule with the conditions written as follows: The rule is attached to the Model. The Model contains hundreds of selections and on average each valid configuration contains 50 selected items. There is only one selection with the description "MXC-7500". What action can be taken to improve the rule performance?
Exam C8010-240 - admin post to:2017-07-28 read more

The day when the contract ends must be selected in the Model. What kind of property should be used for this requirement?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler tasked with creating hundreds of rules needs to organize the rules. The rules with similar behaviors and actions should be organized together so that they appear together in the drop-down during the rule attachment process. What technique can the modeler use to accomplish this?
Exam C8010-240 - admin post to:2017-07-28 read more

A car manufacturer wants to display a list of available cars based on what the customer chooses for the: ?brand of the car (e.g. Honda, Ford, Toyota), and ?type of the car ( (e.g. hatchback, Sports Utility Vehicle (SUV), convertible). Additional information: ?"CarType" is declared as List type. ?"AvailableCars" is declared as String. ?The rule fires on success. What should be the rule fragment/condition written for this?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: What is the display JSP template option used for the image above?
Exam C8010-240 - admin post to:2017-07-28 read more

Previously, a car dealership allowed variations in seat color, body color, interior color and logo color. The colors were determined by the four properties attached at the Model. To put an end to outrageous color combinations made by the customers, the car dealership owner decided to sell one fixed combination in the morning, another in the afternoon and a third in the evening. Assume: ?the period of time during the day can be obtained from another property. ?the color combinations are configured in a property file. Which function can be used to determine the color of the car?
Exam C8010-240 - admin post to:2017-07-28 read more

The requirement for a Model is such that option A cannot be selected together with option B. When option A is selected, option B must be hidden; when option B is selected, option A must be hidden. Which modeling technique(s) can be used to achieve the intended behavior?
Exam C8010-240 - admin post to:2017-07-28 read more

While working on the Model, the modeler finds a requirement to calculate and formulate the average of two real values with an accuracy of three decimal points, What type of property should be used for storing this result?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler has created a rule to display an error message on a certain condition when a user makes a selection. The correct error message is displayed. However, the requirement is for the message to be displayed adjacent to that selection, and this was not achieved. What should the modeler examine and correct?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: What type of UI Layout is being used in the image?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: In the Tabular Display with Quantity Box Selection as shown in the image, the requirement is for the user to update the quantity. What should be chosen for the Option Class display?
Exam C8010-240 - admin post to:2017-07-28 read more

In a Model that is used to configure and order "Tractors", the configuration of the "Attachment" is rather complicated. A tractor can only be ordered with one optional attachment. A junior modeler planned to use dynamic instantiation, and while seeking the advice of a senior modeler, was told that it was an inappropriate solution. The modeler is advised to avoid using dynamic instantiation. What is an INVALID justification to do so?
Exam C8010-240 - admin post to:2017-07-28 read more

ModelA and ModelB both reference a common Option Item Group. After the Models were cached, a change was made to both ModelA and the common Option Item Group. A "compile all" and "test" is then done on the Models. What is the result?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model allows the user to capture notes and/or upload a file in different sections: ?the "notes" section will be used for entering comments. ?the "fileupload" section will allow a single file to be uploaded. Which of the following section(s) uses UI Control User Entered Values?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler discovers that there is an Option Item Group in the root Model Group that exists for different logos which can be offered for printing on variety of articles. How can the modeler use this information to create a Model of a shirt?
Exam C8010-240 - admin post to:2017-07-28 read more

Option Class (Microprocessor) has 10 Option Items within it. All the 10 Option Items listed within the Microprocessor Option Class should be displayed and the end user should be allowed to select only one of the 10 Option Items. The company currently uses Radio Button to display this content, but this takes up too much space on the screen and needs to be changed. What's an alternative UI Control option?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image of a UI Control, where the user is presented with the size and resolution of each style monitor. What type of control is being used?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler accidentally attaches a Model for a desktop to a printer product in the product catalog. What is the outcome of this?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model that is used to configure a notebook includes a section that is used to configure the installed Operating System (OS) and all the compatible accessories. Installing the OS and accessories is not mandatory, but it makes the Model run very slowly due to the complexity involved. What can a modeler do to alleviate the problem, and make the Model perform faster for users who don't need to configure OS and accessories?
Exam C8010-240 - admin post to:2017-07-28 read more

At the Model or Option Class level, the property used to identify which image to display is:
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler needs to pass specific properties from a Model or a sub-model to an external system. What kind of properties should be used?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model, A_Notebook_1001 is created with Option Classes: microprocessor, memory, disc drive, monitor, and software. The modeler tries to reuse these components in another Model (A_Notebook_2001) by attaching Options Classes from A_Notebook_1001, and is unable to do so. What might be the reason behind this?
Exam C8010-240 - admin post to:2017-07-28 read more

A sub-model is instantiated multiple times using the dynamic instantiation control in a Model, but the requirement is to have a different description for each instance of the sub- model. Review the following image: Which UI property can be used to achieve this requirement?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model needs to output a property that represents the number of discount offers the user has selected, but the downstream application expects a text value. What kind of property must be created for the output property?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: What should the modeler do to view the price for all the Option Items as per the image?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler is modifying a Model called "Model_M1" and decides that another existing Model called "Model_M2" can be reused by attaching it to one of the Model_1 Option Classes called "Option_Class_C1". However, Model_M2 already has Model_M1 as a sub- model. What happens when the modeler proceeds to attach Model_M2 to Option_Class_C1?
Exam C8010-240 - admin post to:2017-07-28 read more

Review the following image: Which UI: UEV property needs to be changed in order to change the behavior from image A to image B?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler has created the Model for a motorcycle and was about to start adding Option Classes for maintenance contracts when the modeler noticed that the Option Class Group "Opt_Class_Grp_Mnt" created and used for the maintenance contracts of cars is similar. A rule specific to calculating maintenance charges of cars is created on the Model Group and attached to the Option Class in the "Opt_Class_Grp_Mnt". It can potentially be reused by attaching it to an Option Class in the Model for motorcycle. Assume that a generic rule for calculating maintenance charges of cars and motorcycles cannot be created. Which of the following approaches will ensure that the rules for cars are applied to the Model for cars, and the rules for motorcycles are applied to the Model for motorcycles?
Exam C8010-240 - admin post to:2017-07-28 read more

The prescribed practice of promoting a Model into Production is by taking the following path: Development -> QA -> Production. Why is this strategy always used?
Exam C8010-240 - admin post to:2017-07-28 read more

A modeler wants to check the Models and the rules that were just created. How can the execution of the Model be tested?
Exam C8010-240 - admin post to:2017-07-28 read more

A furniture company has a Model for a house with an option to select different types of furniture commonly found in a house (e.g. tables, chairs, etc). Each of those furniture types are modeled as Option Classes and the available options are defined as Option Items. The prices are defined as a property on the Option Items. Multiple selections can be made in each of the furniture types and quantities entered for each selection. Which function(s) will be needed in a rule attached at the Model level to determine the average price of all the goods purchased?
Exam C8010-240 - admin post to:2017-07-28 read more

Which statement is NOT applicable to the Property Pool?
Exam C8010-240 - admin post to:2017-07-28 read more

A company wants its Customer Service Representatives (CSRs) to be able to offer free gifts ("free offers") to customers as incentives for signing up for their services. The CSRs can select as many free offers as they need to close the deal as long as the total amount of the gifts selected does not exceed the maximum allowed for the type of service being sold. The maximum free offer amount will be assigned to a property at the free offers Option Class level. The value of the free gift is the Option Item's UI: PRICE. An error message should be displayed when the total of the free offers selected is more than the maximum free offer amount. A rule for the error message needs to be created. Which two Function Handlers can be used in the rule fragment for checking the maximum free offer amount?
Exam C8010-240 - admin post to:2017-07-28 read more

By default, how often is the Rule Firing trace updated?
Exam C8010-240 - admin post to:2017-07-28 read more

When using a UEV Option Item for inputting a string value, what can be done to use the entered string into a property for use in rules?
Exam C8010-240 - admin post to:2017-07-28 read more

A Model has a custom Function Handler that returns a string value. The modeler wishes to set the same value (returned by the custom Function Handler) into a property in an Option Item. How can this be accomplished?
Exam C8010-240 - admin post to:2017-07-28 read more

A real estate company models its office floor as a Model with various utilities as the Model components. The customers need to be able to select the utilities required for their office (e.g. table-chairs, extension phones, desktops, etc.) and the quantity of each utility required. Only one configuration can be made for each utility, and the quantity for that particular configuration will be delivered. How should this be modeled?
Exam C8010-240 - admin post to:2017-07-28 read more